Be sure and Listen to the TLG Windpower Hour for great info on Windpower and related topics.
Thursdays at 11 AM Pacific Time.
Our Kits Qualify for the 30 Percent IRS Credit for Residential Energy Efficient Property. Complete Wind Generator Kit features the following: Your choice of 2 generators, the WindBlue DC-540 or the WindBlue DC-520 or one of each. Our Permanent Magnet Alternators are equipped with 3-phase AC and standard DC output connections. Note: Two "AC Output Connection Kits" are required for use with the 3-phase AC Output connector. (one for each generator, sold separately) 2 TLG Windpower Products NEW Stainless Steel Hub 5 Foot Diameter "Cy-Clone" Rotor Blades perfectly matched to our generators providing increased performance in high wind situations while still maintaining great low wind performance. Custom Built Yaw Mount Assembly with Exclusive Teflon Pivot Washer Laser Cut Aluminum Tail Vanes which match the Rotor Blades Perfectly and Create a Super Cool Look This is The Highest Quality PMA Wind Generator Kit around. Built with the Best Components at an Affordable Price Complete Assembled Weight: 48 lbs Overall Length 43" Generator Features: Completely Brushless Alternator eliminates the need for maintenance and reduces friction NEW !! Features 303 Stainless Steel Generator Shaft for the ultimate in corrosion protection and increased power output. Now equipped with a 3-phase AC Output pigtail. This small black connector on the back of the unit allows you to run less costly 3-conductor wire to your battery location instead of large heavy battery cables. Once at the battery location the 3-phase AC is fed into a rectifier box (sold separately) and converted to DC for connection to the battery. Note: WindBlue AC output equipped alternators can still be connected for DC output by using the battery terminal on the back of alternator, however, only one output should be connected to your batteries at a time. The other should be left unconnected. WARNING: The 3-phase AC output connector DOES NOT make your alternator a “Grid-Tie” unit so don’t try to wire the AC leads into the fuse box of your house as death, fire, and destruction will likely result !! Specially wound Low RPM Output stators. Super Strong N40 grade Neodymium rare earth magnets in its core to replace the inefficient electromagnetic field coil Zero Cogging It is built using Brand New GM Delco alternator components including NEW Stator Coils, factory balanced Stainless Steel shafts and New Rotor Pole Shoes. Replacement bearings and parts will be available for years Built-in rectifier provides DC output if you don't want to use the 3-phase AC output connection. (DC output is unregulated) Built to last with a baked on clear ceramic finish that will last for years in harsh outdoor environments 90 day full replacement warranty on all units (Warranty void if PMA has been opened or tampered with) Rotor Blade Features: Proven design by one of the Best Blade Manufactures in the Industry, TLG Windpower Products 5 Foot (60") in Diameter 3/16 Inch Thick Stainless Steel Hub and 1/8 Inch Thick Laser Cut Aircraft Grade Aluminum Blades for Maximum Strength and Durability Super Quiet Design, If you own a set of those Noisy Black Plastic Blades sold by fledgling wind turbine companies you won't believe the difference Blade Hub comes Unpainted ready to Prime and Paint the color of your choice. The Blades can be waxed, or painted with a clear coat finish but even if left untouched they will remain shiny for a long time These are NOT Cheap Thin Aluminum blades. A Hail Storm will not damage them and Winds up to 100 MPH will not Bend them Generator Mount Features: Modern Simple Design creates a Clean Look Strong 1 Inch Steel Square Tubing Frame Fits over Standard 1.5 Inch Schedule #40 or #80 pipe Low Friction Teflon Pivot Washer for Smooth Yaw Movement in the Lightest Breeze. A First for Kits in this Class High Quality Split Lock Collar at the Base for a Strong Hold on your Tower Built-In Tail Boom holds a Beautiful Set of 1/8 Inch Laser Cut Aircraft Grade Aluminum Tail Vanes. Vanes can be waxed or painted with a clear coat finish but like the blades, if left untouched they will look new for a long time Mount comes painted in a Black Primer finish and ready to paint the color of your choice. We like Blue of course Proudly made in the USA
Complete Wind Generator Kit features the following: Your choice of 2 generators, the WindBlue DC-540 or the WindBlue DC-520 or one of each. Our Permanent Magnet Alternators are equipped with 3-phase AC and standard DC output connections. Note: Two "AC Output Connection Kits" are required for use with the 3-phase AC Output connector. (one for each generator, sold separately) 2 TLG Windpower Products NEW Stainless Steel Hub 5 Foot Diameter "Cy-Clone" Rotor Blades perfectly matched to our generators providing increased performance in high wind situations while still maintaining great low wind performance. Custom Built Yaw Mount Assembly with Exclusive Teflon Pivot Washer Laser Cut Aluminum Tail Vanes which match the Rotor Blades Perfectly and Create a Super Cool Look This is The Highest Quality PMA Wind Generator Kit around. Built with the Best Components at an Affordable Price Complete Assembled Weight: 48 lbs Overall Length 43" Generator Features: Completely Brushless Alternator eliminates the need for maintenance and reduces friction NEW !! Features 303 Stainless Steel Generator Shaft for the ultimate in corrosion protection and increased power output. Now equipped with a 3-phase AC Output pigtail. This small black connector on the back of the unit allows you to run less costly 3-conductor wire to your battery location instead of large heavy battery cables. Once at the battery location the 3-phase AC is fed into a rectifier box (sold separately) and converted to DC for connection to the battery. Note: WindBlue AC output equipped alternators can still be connected for DC output by using the battery terminal on the back of alternator, however, only one output should be connected to your batteries at a time. The other should be left unconnected. WARNING: The 3-phase AC output connector DOES NOT make your alternator a “Grid-Tie” unit so don’t try to wire the AC leads into the fuse box of your house as death, fire, and destruction will likely result !! Specially wound Low RPM Output stators. Super Strong N40 grade Neodymium rare earth magnets in its core to replace the inefficient electromagnetic field coil Zero Cogging It is built using Brand New GM Delco alternator components including NEW Stator Coils, factory balanced Stainless Steel shafts and New Rotor Pole Shoes. Replacement bearings and parts will be available for years Built-in rectifier provides DC output if you don't want to use the 3-phase AC output connection. (DC output is unregulated) Built to last with a baked on clear ceramic finish that will last for years in harsh outdoor environments 90 day full replacement warranty on all units (Warranty void if PMA has been opened or tampered with) Rotor Blade Features: Proven design by one of the Best Blade Manufactures in the Industry, TLG Windpower Products 5 Foot (60") in Diameter 3/16 Inch Thick Stainless Steel Hub and 1/8 Inch Thick Laser Cut Aircraft Grade Aluminum Blades for Maximum Strength and Durability Super Quiet Design, If you own a set of those Noisy Black Plastic Blades sold by fledgling wind turbine companies you won't believe the difference Blade Hub comes Unpainted ready to Prime and Paint the color of your choice. The Blades can be waxed, or painted with a clear coat finish but even if left untouched they will remain shiny for a long time These are NOT Cheap Thin Aluminum blades. A Hail Storm will not damage them and Winds up to 100 MPH will not Bend them Generator Mount Features: Modern Simple Design creates a Clean Look Strong 1 Inch Steel Square Tubing Frame Fits over Standard 1.5 Inch Schedule #40 or #80 pipe Low Friction Teflon Pivot Washer for Smooth Yaw Movement in the Lightest Breeze. A First for Kits in this Class High Quality Split Lock Collar at the Base for a Strong Hold on your Tower Built-In Tail Boom holds a Beautiful Set of 1/8 Inch Laser Cut Aircraft Grade Aluminum Tail Vanes. Vanes can be waxed or painted with a clear coat finish but like the blades, if left untouched they will look new for a long time Mount comes painted in a Black Primer finish and ready to paint the color of your choice. We like Blue of course Proudly made in the USA
Complete Wind Generator Kit features the following:
Generator Features: Completely Brushless Alternator eliminates the need for maintenance and reduces friction NEW !! Features 303 Stainless Steel Generator Shaft for the ultimate in corrosion protection and increased power output. Now equipped with a 3-phase AC Output pigtail. This small black connector on the back of the unit allows you to run less costly 3-conductor wire to your battery location instead of large heavy battery cables. Once at the battery location the 3-phase AC is fed into a rectifier box (sold separately) and converted to DC for connection to the battery. Note: WindBlue AC output equipped alternators can still be connected for DC output by using the battery terminal on the back of alternator, however, only one output should be connected to your batteries at a time. The other should be left unconnected. WARNING: The 3-phase AC output connector DOES NOT make your alternator a “Grid-Tie” unit so don’t try to wire the AC leads into the fuse box of your house as death, fire, and destruction will likely result !! Specially wound Low RPM Output stators. Super Strong N40 grade Neodymium rare earth magnets in its core to replace the inefficient electromagnetic field coil Zero Cogging It is built using Brand New GM Delco alternator components including NEW Stator Coils, factory balanced Stainless Steel shafts and New Rotor Pole Shoes. Replacement bearings and parts will be available for years Built-in rectifier provides DC output if you don't want to use the 3-phase AC output connection. (DC output is unregulated) Built to last with a baked on clear ceramic finish that will last for years in harsh outdoor environments 90 day full replacement warranty on all units (Warranty void if PMA has been opened or tampered with) Rotor Blade Features: Proven design by one of the Best Blade Manufactures in the Industry, TLG Windpower Products 5 Foot (60") in Diameter 3/16 Inch Thick Stainless Steel Hub and 1/8 Inch Thick Laser Cut Aircraft Grade Aluminum Blades for Maximum Strength and Durability Super Quiet Design, If you own a set of those Noisy Black Plastic Blades sold by fledgling wind turbine companies you won't believe the difference Blade Hub comes Unpainted ready to Prime and Paint the color of your choice. The Blades can be waxed, or painted with a clear coat finish but even if left untouched they will remain shiny for a long time These are NOT Cheap Thin Aluminum blades. A Hail Storm will not damage them and Winds up to 100 MPH will not Bend them Generator Mount Features: Modern Simple Design creates a Clean Look Strong 1 Inch Steel Square Tubing Frame Fits over Standard 1.5 Inch Schedule #40 or #80 pipe Low Friction Teflon Pivot Washer for Smooth Yaw Movement in the Lightest Breeze. A First for Kits in this Class High Quality Split Lock Collar at the Base for a Strong Hold on your Tower Built-In Tail Boom holds a Beautiful Set of 1/8 Inch Laser Cut Aircraft Grade Aluminum Tail Vanes. Vanes can be waxed or painted with a clear coat finish but like the blades, if left untouched they will look new for a long time Mount comes painted in a Black Primer finish and ready to paint the color of your choice. We like Blue of course Proudly made in the USA
NEW !! Features 303 Stainless Steel Generator Shaft for the ultimate in corrosion protection and increased power output.
WARNING: The 3-phase AC output connector DOES NOT make your alternator a “Grid-Tie” unit so don’t try to wire the AC leads into the fuse box of your house as death, fire, and destruction will likely result !!
Super Strong N40 grade Neodymium rare earth magnets in its core to replace the inefficient electromagnetic field coil
Built-in rectifier provides DC output if you don't want to use the 3-phase AC output connection. (DC output is unregulated) Built to last with a baked on clear ceramic finish that will last for years in harsh outdoor environments 90 day full replacement warranty on all units (Warranty void if PMA has been opened or tampered with) Rotor Blade Features: Proven design by one of the Best Blade Manufactures in the Industry, TLG Windpower Products 5 Foot (60") in Diameter 3/16 Inch Thick Stainless Steel Hub and 1/8 Inch Thick Laser Cut Aircraft Grade Aluminum Blades for Maximum Strength and Durability Super Quiet Design, If you own a set of those Noisy Black Plastic Blades sold by fledgling wind turbine companies you won't believe the difference Blade Hub comes Unpainted ready to Prime and Paint the color of your choice. The Blades can be waxed, or painted with a clear coat finish but even if left untouched they will remain shiny for a long time These are NOT Cheap Thin Aluminum blades. A Hail Storm will not damage them and Winds up to 100 MPH will not Bend them Generator Mount Features: Modern Simple Design creates a Clean Look Strong 1 Inch Steel Square Tubing Frame Fits over Standard 1.5 Inch Schedule #40 or #80 pipe Low Friction Teflon Pivot Washer for Smooth Yaw Movement in the Lightest Breeze. A First for Kits in this Class High Quality Split Lock Collar at the Base for a Strong Hold on your Tower Built-In Tail Boom holds a Beautiful Set of 1/8 Inch Laser Cut Aircraft Grade Aluminum Tail Vanes. Vanes can be waxed or painted with a clear coat finish but like the blades, if left untouched they will look new for a long time Mount comes painted in a Black Primer finish and ready to paint the color of your choice. We like Blue of course Proudly made in the USA
Rotor Blade Features:
Generator Mount Features:
