Introducing the Cy-Clone X2 Dual ™
Add-On Kit for current owners of our
"Lite Breeze" and "Breeze" Kits
If you have purchased one of our "Lite Breeze" or "Breeze" Kits
after August of 2009 than your mount should be ready to accept the X2 Dual add-on mount. This includes those who purchased mount kits also. To see if your mount is compatible, check for a hole between the bottom two rings on the mount as shown in the picture below.
SAVES YOU MONEY, Only one tower needed for two Wind Generators !!
Patent Pending
Our Kits Qualify for the 30 Percent IRS Credit for Residential Energy Efficient Property.
Complete Add-On Kit features the following:
-
Your choice of either the WindBlue DC-540 or the WindBlue DC-520. Our Permanent Magnet Alternators are equipped with 3-phase AC and standard DC output connections. Note: An "External Rectifier Connection Kit" (sold separately) is required for use with the 3-phase External Rectifier Output connector. TLG Windpower Products NEW Stainless Steel Hub 5 Foot Diameter Reverse Pitch "Cy-Clone" Rotor Blades perfectly matched to our generators providing increased performance in high wind situations while still maintaining great low wind performance.
-
Custom Built Yaw Mount Assembly.
-
All Hardware needed to bolt to your existing mount.
Generator Features:
- Completely Brushless Alternator eliminates the need for maintenance and reduces friction
-
NEW !! Features 303 Stainless Steel Generator Shaft for the ultimate in corrosion protection and increased power output.
-
Now equipped with a 3-phase External Rectifier Output pigtail. This small black connector on the back of the unit allows you to run less costly 3-conductor wire to your battery location instead of large heavy battery cables. Once at the battery location the 3-phase power is fed into an external rectifier (sold separately) and converted to DC for connection to the battery.
Note: WindBlue external rectifier output equipped alternators can still be connected for DC output by using the battery terminal on the back of alternator, however, only one output should be connected to your batteries at a time. The other should be left unconnected.
WARNING: The 3-phase external rectifier output connector DOES NOT make your alternator a “Grid-Tie” unit so don’t try to wire the leads into the fuse box of your house as death, fire, and destruction will likely result !!
Super Strong N40 grade Neodymium rare earth magnets in its core to replace the inefficient electromagnetic field coil
-
Zero Cogging
- It is built using Brand New GM Delco alternator components including NEW Stator Coils, factory balanced Stainless Steel shafts and New Rotor Pole Shoes. Replacement bearings and parts will be available for years
- Built-in rectifier provides DC output if you don't want to use the 3-phase external rectifier output connection. (DC output is unregulated)
- Built to last with a baked on clear ceramic finish that will last for years in harsh outdoor environments
- 90 day full replacement warranty on all units (Warranty void if PMA has been opened or tampered with)
Rotor Blade Features:
-
Proven design by one of the Best Blade Manufactures in the Industry, TLG Windpower Products
-
5 Foot (60") in Diameter
-
3/16 Inch Thick Stainless Steel Hub and 1/8 Inch Thick Laser Cut Aircraft Grade Aluminum Blades for Maximum Strength and Durability
-
Super Quiet Design, If you own a set of those Noisy Black Plastic Blades sold by fledgling wind turbine companies you won't believe the difference
-
Blade Hub comes Unpainted ready to Prime and Paint the color of your choice. The Blades can be waxed, or painted with a clear coat finish but even if left untouched they will remain shiny for a long time
-
These are NOT Cheap Thin Aluminum blades. A Hail Storm will not damage them and Winds up to 100 MPH will not Bend them
