"Lite BreezeÔ" Wind Generator Kit

Complete Wind Generator Kit features the following:

         Generator Features:

• Completely Brushless Alternator eliminates the need for maintenance and reduces friction
• NEW !! Features 303 Stainless Steel Generator Shaft for the ultimate in corrosion protection and increased power output.
•  Now equipped with a 3-phase AC Output pigtail. This small black connector on the back of the unit allows you to run less costly 3-conductor wire to your battery location instead of large heavy battery cables. Once at the battery location the 3-phase AC is fed into a rectifier box (sold separately) and converted to DC for connection to the battery.
  
  Note:  WindBlue AC output equipped alternators can still be connected for DC output by using the battery terminal on the back of alternator, however, only one output should be connected to your batteries at a time. The other should be left unconnected. 
•  WARNING: The 3-phase AC output connector DOES NOT make your alternator a “Grid-Tie” unit so don’t try to wire the AC leads into the fuse box of your house as death, fire, and destruction will likely result !!
• Specially wound Low RPM Output stator.
• Super Strong N40 grade Neodymium rare earth magnets in its core to replace the inefficient electromagnetic field coil
• Zero Cogging
• It is built using Brand New GM Delco alternator components including NEW Stator Coils, factory balanced Stainless Steel shafts and New Rotor Pole Shoes. Replacement bearings and parts will be available for years

  

• Built-in rectifier provides DC output if you don't want to use the 3-phase AC output connection. (DC output is unregulated)
• Built to last with a baked on clear ceramic finish that will last for years in harsh outdoor environments
• 90 day full replacement warranty on all units  (Warranty void if PMA has been opened or tampered with)
• Click here to check out our Frequently Asked Questions: FAQ page.

      Rotor Blade Features:

• Proven design by one of the Best Blade Manufactures in the Industry, TLG Windpower Products
• 5 Foot (60") in Diameter
• 3/16 Inch Thick Stainless Steel Hub and 1/8 Inch Thick Laser Cut Aircraft Grade Aluminum Blades for Maximum Strength and Durability
• Super Quiet Design, If you own a set of those Noisy Black Plastic Blades sold by fledgling wind turbine companies you won't believe the difference
• Blade Hub comes Unpainted ready to Prime and Paint the color of your choice. The Blades can be waxed, or painted with a clear coat finish but even if left untouched they will remain shiny for a long time
• These are NOT Cheap Thin Aluminum blades. A Hail Storm will not damage them and Winds up to 100 MPH will not Bend them 

     Generator Mount Features:

• Modern Simple Design creates a Clean Look
• Strong 1 Inch Steel Square Tubing Frame
• Fits over Standard 1.5 Inch Schedule #40 or #80 pipe
• Low Friction Teflon Pivot Washer for Smooth Yaw Movement in the Lightest Breeze. A First for Kits in this Class

  

• High Quality Split Lock Collar at the Base for a Strong Hold on your Tower
• Built-In Tail Boom holds a Beautiful Set of 1/8 Inch Laser Cut Aircraft Grade Aluminum Tail Vanes. Vanes can be waxed or painted with a clear coat finish but like the blades, if left untouched they will look new for a long time
• Mount comes painted in a Black Primer finish and ready to paint the color of your choice. We like Blue of course

 Have you seen some of the Ads on EBay and other internet sites selling other Delco Alternator Conversion Wind Generator Kits claiming outputs of "800 Watts"  - "1000 Watts" or even More ?? Have you read the fine print at what wind speed they are said to be making this power at ??

 Well here it is in BIG PRINT

Over 70 Miles Per Hour !!