Home > Complete Kits >

"Cy-Clone Lite Breeze" Wind Generator Kit" with Charge Controller
Cy-Clone Lite Breeze Low Wind Generator Kit
The Best Looking / Strongest Built Kit Available on the Market Today

Additional Photos:

"Lite Breeze" Low Wind Kit
Sale Price $595.00

Quantity in Stock:(Out of Stock)
Availability:: Usually Ships in 24 to 48 Hours
Product Code: CY-LOW-KIT



"LiteBreeze" Wind Generator Kit

Best Suited for Areas with Average Winds Above 5 MPH

Complete Wind Generator Kit features the following:

  • The WindBlue DC-540 Permanent Magnet Alternator PMA equipped with 3-phase External Rectifier connection and standard DC output connection.
  • Features a Stainless Steel Generator Shaft for the ultimate in corrosion protection and increased power output.
  • BACK BY POPULAR DEMAND, TLG CY-CLONE BLADES!! The Cy-Clone features 8" wide roots on its blades which offers horsepower from the start. Its feathered tips allow greater top-end rpm and ultra quiet operation. The hub design has an expanded centerline to provide both a stronger hub, and true overall dynamic balancing.
  • Custom Built Yaw Mount Assembly with Exclusive Teflon Pivot Washer
  • Plasma Cut Steel Tail Vanes create a Super Cool Look
  • This is The Highest Quality PMA Wind Generator Kit around. Built with the Best Components at an Affordable Price

  • Includes a 12 Volt 25 Amp Charge Controller with Built-In Rectifier in the box for a complete setup!!

  • Complete Assembled Weight: 30 lbs
  • Overall Length 43"

Generator Features:

  • Completely Brushless Alternator eliminates the need for maintenance and reduces friction
  • 303 Stainless Steel shaft resists corrosion. Shaft now has a keyway to keep the rotor from slipping.
  • Equipped with a 3-phase External Rectifier pigtail. This small black connector on the back of the unit allows you to run less costly 3-conductor wire to your battery location instead of large heavy battery cables in addition to lessening the voltage loss you get with DC power. Once at the battery location the 3-phase power is fed into the included Charge Controller and is converted to DC for connection to the battery.
  • Specially wound Low RPM Output stator.
  • Super Strong N50 grade Neodymium rare earth magnets in its core to replace the inefficient electromagnetic field coil
  • Zero Cogging

It is built using Brand New GM Delco alternator components including NEW Stator Coils, factory balanced Stainless Steel shaft. Replacement bearings and parts will be available for years.

Rotor Blade Features:

  • Proven design by TLG Windpower
  • 4' 10" Diameter
  • 3/16 Inch Stainless Steel hub and 1/8 Inch Thick Laser Cut Aircraft Grade Aluminum Blades for Maximum Strength and Durability
  • Super Quiet Design
  • The Blades can be waxed, or painted with a clear coat finish but even if left untouched they will remain shiny for a long time

These are NOT Cheap Thin Aluminum blades. A Hail Storm will not damage them and Winds up to 100 MPH will not Bend them

Generator Mount Features:

  • Modern Simple Design creates a Clean Look
  • Strong 1 Inch Steel Square Tubing Frame
  • Fits over Standard 1.5 Inch Schedule #40 or #80 pipe

Low Friction Teflon Pivot Washer for Smooth Yaw Movement in the Lightest Breeze. A First for Kits in this Class

  • High Quality Split Lock Collar at the Base for a Strong Hold on your Tower
  • Built-In Tail Boom holds a beautiful set of 13 gauge steel tail vanes. Vanes come primed and ready to paint any color you like. We painted ours Silver to match the Rotor Blades.
  • Mount comes painted with Self-Etching Primer and ready to paint the color of your choice. We like Blue of course

Have you seen some of the Ads on EBay and some internet sites for other Delco Alternator Conversion Wind Generator Kits claiming outputs of "800 Watts" - "1000 Watts" or even More ?? Have you read the fine print at what wind speed they are said to be making this power at ??

Well here it is in BIG PRINT

Over 70 Miles Per Hour !!

In most areas of the country the wind only blows over 70 MPH maybe twice a year during a Large Thunderstorm and you're in the storm cellar hoping the roof is still on when you come out!!

The fact is in most areas of the country the average winds are less than 20 MPH. But if you live in an area with average winds 6 - 15 MPH than this kit is for you. Specifically designed for lower wind areas, This unit cuts-in and starts charging a 12 Volt battery in a 6 MPH wind. No gimmicks or fancy sales pitch, just the REAL TRUTH.

The chart below represents the actual output of this kit. We are not afraid to show you our actual output chart. Others may sell wind generator kits based on maximum output in Hurricane Force Winds but we want to let YOU make an Intelligent Decision based on the Everyday Output from our Kits.

This Chart is based on a 12 volt system.

And don't forget to check our FAQ Page to help answer some of your questions but feel free to send an e-mail to questions@windbluepower.com if you need further information.

Proudly made in the USA

Average Customer Review: 4.5 of 5 Total Reviews: 9 Write a review.

  0 of 0 people found the following review helpful:
Lite Breeze Kit November 1, 2016
Reviewer: Eduardo from Ciudad Madero, Buenos Aires Argentina  
Please, send me the size and weight, of the kit package in order to ship.
thank you in advance.

Was this review helpful to you?

  1 of 2 people found the following review helpful:
Lite Breeze Kit February 24, 2010
Reviewer: paul coco from Southampton, NJ United States  
Was very impressed with how fast it charges a 12v car battery!  Cannot wait to buy a second one!

Was this review helpful to you?

  10 of 10 people found the following review helpful:
Low wind kit August 12, 2009
Reviewer: Brad Wiley from syracuse, NY United States  
Ok, I've made turbines and PMA's. This system does EXACTLY what it says it does. Please do not waste your time on ebay with all of the wanna b's. Buy a real turbine from a great company. Thanks Wind Blue!!!!!

Was this review helpful to you?

  2 of 3 people found the following review helpful:
Unbelievable July 12, 2009
Reviewer: T.K. from Schuylar, N.Y.  
Matched this PMA up with a Six-Pack of Air-X Blades after buying it on Ebay. The BladeSpeed was mindboggling and the Volt meter went to 110+ during one gust. Saturday, July 11th 2009 about 3:30 p.m. Mohawk Highlands N.Y. Average for the day was about 40-50v in 12-16mph winds. 11ft. Tower. I highly recommend this product. The mount is very sturdy and pivots perfectly on the (Teflon) washer. Excellent customer service, shipping, and packaging. I've been building these for about six months. I've experimented with many kinds of motor and blades.
Just bought my second kit and am planning to mount it on a 20ft. Tower.

Was this review helpful to you?

  6 of 6 people found the following review helpful:
Excellent, Well made, works as stated ... June 25, 2009
Reviewer: Lawrence Portell from Joplin, MO United States  
I had modified an alternator myself using the permanent magnet rotor and the low wind speed winding.  It actually starts charging at about 5~6 mph.  Recently I lost my setup to 95 mph winds and am just getting around to get it back up and running.  I recommend going up a step or two in the sizing of the guy wires.  Use the double clamp method on all guy wires for the most secure step up.  You will not regret it in the long run if you ever run into a similar situation.  I do recommend the kit over messing with the old alternators, the cost savings is very small.

Was this review helpful to you?

View All Customer Reviews
(Your shopping cart is empty)