"Breeze" Wind Generator Kit
Best Suited for Areas with Average Winds Above 10 MPH
Wind Generator Kit features the following:
- The WindBlue DC-520 Permanent Magnet Alternator PMA
equipped with 3-phase External Rectifier connection and standard DC output
- Features a Stainless Steel Generator Shaft for the ultimate in corrosion protection
and increased power output.
- NEW WindyNation Stainless Steel Hub 5 Foot Diameter "HyperSpin" Rotor Blades which perfectly match our generators
providing increased performance in high wind situations while still
maintaining great low wind performance.
- Custom Built Yaw Mount Assembly with Exclusive Teflon
- Laser Cut Aluminum Tail Vanes which match the Rotor
Blades and create a Super Cool Look
- This is The Highest Quality PMA Wind Generator Kit
around. Built with the Best Components at an Affordable Price
- Includes a 12 Volt 25 Amp Charge Controller with
Built-In Rectifier in the box for a complete setup!!
- Complete Assembled Weight: 34 lbs
- Overall Length 43"
- Completely Brushless Alternator eliminates the need for
maintenance and reduces friction
- 303 Stainless Steel shaft resists corrosion
- Equipped with a 3-phase External Rectifier pigtail.
This small black connector on the back of the unit allows you to run less
costly 3-conductor wire to your battery location instead of large heavy battery
cables. Once at the battery location the 3-phase power is fed into the
Included Charge Controller and is converted to DC for connection to the
- Specially wound Low RPM Output stator.
- Super Strong
N50 grade Neodymium rare earth magnets in its core to replace the
inefficient electromagnetic field coil
- Zero Cogging
is built using Brand New GM Delco
alternator components including NEW Stator Coils, factory
balanced Stainless Steel shaft. Replacement bearings and parts will be
available for years.
- Built-in rectifier provides DC output if you don't want
to use the 3-phase External Rectifier output connection. (DC output is
- Built to last with a baked on
clear ceramic finish that will last for years in harsh outdoor
- 90 day full replacement warranty on all units (Warranty
void if PMA has been opened or tampered with)
- Click here to check out our Frequently Asked
Questions: FAQ page.
- Proven design by WindyNation
- 5 Foot in Diameter
- 3/16 Inch Thick
Stainless Steel Hub and 1/8 Inch ThickLaser Cut Aircraft Grade
Aluminum Blades for Maximum Strength and Durability
- Super Quiet Design,
If you own a set of those Noisy Plastic Blades sold by other wind
turbine companies you won't believe the difference
- Blade Hub comes Unpainted ready to Prime and Paint the
color of your choice. The Blades can be waxed, or painted with a clear
coat finish but even if left untouched they will remain shiny for a long
These are NOT Cheap Thin Aluminum blades. A Hail
Storm will not damage them and Winds up to 100 MPH will not Bend them
- Modern Simple Design creates a Clean Look
- Strong 1 Inch Steel Square Tubing Frame
- Fits over Standard 1.5 Inch Schedule #40 or #80 pipe
Friction Teflon Pivot Washer for Smooth Yaw Movement in the Lightest Breeze. A First for Kits in this Class
- High Quality Split Lock Collar
at the Base for a Strong Hold on your Tower
- Built-In Tail Boom holds a Beautiful Set of 1/8 Inch
Laser Cut Aircraft Grade Aluminum Tail Vanes. Vanes can be waxed or
painted with a clear coat finish but like the blades, if left untouched
they will look new for a long time
- Mount comes painted in a Black Primer finish and ready to
paint the color of your choice.
We like Blue of course
you seen some of the Ads on EBay and some internet sites for other Delco
Alternator Conversion Wind Generator Kits claiming outputs of "800 Watts" - "1000 Watts" or even More ?? Have you read the fine print at what wind speed they are said to
be making this power at ??
Well here it is in BIG PRINT
Over 70 Miles Per Hour !!
In most areas of the country the wind only blows over 70 MPH maybe twice a year
during a Large Thunderstorm and you're in the storm cellar hoping the roof
is still on when you come out!!
The fact is in most
areas of the country the average winds are less than 20 MPH.
But if you live in an area with average winds Above 12 MPH than this kit
is for you. Specifically designed for Higher Wind areas, This unit cuts-in and
starts charging a 12 Volt battery in a 12 MPH wind. No gimmicks
or fancy sales pitch just the REAL TRUTH.
The chart below represents the actual output of this kit. We are
not afraid to show you our actual output chart. Others may sell wind generator
kits based on maximum output in
Hurricane Force Winds but we want to let YOU make an Intelligent Decision based on the Everyday Output from our Kits.
Chart represents actual charge into a 12 Volt Battery.
And don't forget to check out our FAQ Page to help answer some of your questions but feel free to send an
e-mail to firstname.lastname@example.org if you need further information.
Proudly made in the USA