12 Volt 25 Amp Charge Controller for Wind Generators

  Home > Charge Controllers >

12 Volt 25 Amp Charge Controller for Wind Generators
12 Volt 25 Amp Charge Controller for Wind Generators


 
12 Volt 25 Amp 3-Phase Charge Controller
Our Price: $44.00

Quantity in Stock:9
Availability:: Usually Ships in 24 to 48 Hours
Product Code: WBCC
Qty:

Description
 
This Incredible little 12 Volt 25 Amp Charge Controller with Built-In Rectifier is just the answer for those on a budget.

It features Automatic Generator Braking which puts the brakes on the generator when the batteries reach a full charge of 14.5 Volts. The heat generated during braking is dissipated thru it's built-in heat sink fins.

It automatically releases the generator braking when your battery bank voltage falls below 14.5 volts.


It can be used with any Wind Generator rated up to 300 watts with a 3 phase AC type output.
It can handle up to 400 watts if mounted to an aluminum plate of at least 8 x 8 inches

Connection is simple with 3 green wires for the 3-phase AC output from the generator and Positive and Negative leads which connect to your 12 Volt battery bank.

Works great with our DC-540 and DC-520 generators.

Not recommended for our DC-512 or DC-500 generators unless the optional 3-phase output pigtail is installed AND the output does not exceed 25 amps for long periods of time.

Measures 3" x 3" wide and 1 inch thick


Share your knowledge of this product with other customers... Be the first to write a review
(Your shopping cart is empty)